ULLAPOOL WOODTURNING CENTRE.

Text Box: Woodturning Equipment.

STB 150 Stebcentre. 1/2” No 1 MT drive.

Price……£35.75.

STB 100 Stebcentre. 7/8” No 1 MT drive.

Price……£35.75.

 Hollow revolving centre No 1 MT.

Price……£46.55.

UWTC 1005

We are now stocking some additional equipment for woodturning, from drive centres, revolving centres,

chucks, chuck jaws, faceplates, and some gauging & sizing tools.

—————————————————————————

If you are currently planning to start a construction project call us today for competitive quote! Banubury Builders

13mm Standard drill chuck & No 1 MT.

Price……£28.60 (complete).

UWTC 1006 

Vicmarc chuck, VM 100.

Price….£185.00

These chucks usually require a thread reducing insert,

supplied separately, see opposite,……………..

Vicmarc Chuck Insert.

This will be required for most lathes, comes with an external thread that fit’s the chuck body, and an internal thread to fit a particular lathe, in this case a 3/4 x 16 tpi.

Price….£28.60

Can be sourced to fit any lathe thread.

A

A

Vicmarc Jaws.

25mm Pin Jaws — VM90/100

Price….£46.86

Vicmarc Jaws.

Long Nose Jaws — VM90/100

Price….£50.15

Vicmarc Jaws/ Plate.

70mm Faceplate Ring — VM90/100

Price…..£18.50

Vicmarc Jaws.

220mm Bowl Jaws — VM90/100

Price….£91.00

285mm Bowl Jaws — VM90/100

Price….£93.75

These jaws are used to hold a bowl from the outer edge in order to remove any spigot or recess from the bottom of a bowl.

Wood screw chuck…..UWTC 1001

Removable screw, faceplate size, 65mm with 4 screw holes, thread size 3/4” x 16 TPI.

Price….£13.95.

Economy, 13mm drill chuck on No 1 MT.

Price….£13.95.

UWTC 1002

145mm diameter faceplate…..UWTC 1003

Thread size 3/4” x 16TPI. (right hand thread).

Price….£10.95.

 

4 Jaw Independent Lathe Chuck…..UWTC 1004

Thread size 3/4” x 16TPI (right Hand thread).

Price….£34.50.

A useful accessory for turning off centred work.

Below a selection of sizing and gauging tools.

The woodturner will require a few sizing and gauging tools, such as dividers, callipers , both internal and external, double ended callipers and vernier callipers where a more accurate size can be achieved by setting to a specific size on the callipers.

Dividers.

Two sizes available, 8” & 12”

Price for 12”….£6.50

8” sold as part of a set of 3, C1,C2 & C3.

Price for the set….£19.95.

C1

C2

C3

Callipers (external).

Two sizes available, 8” & 12”

Price for 12”….£6.99

8” sold as part of a set of 3, C1,C2 & C3.

Price for the set….£19.95.

Callipers (internal).

Two sizes available, 8” & 12”

Price for 12”….£6.99

8” sold as part of a set of 3, C1,C2 & C3.

Price for the set….£19.95.

Vernier Calliper.

Economy grade, 165mm or 6.5”lockable.

Price….£5.99.

Deluxe model, 200mm or 8” lockable,

Price….£19.99.

Inside/outside callipers, 6”

Price….£15.50.

Also available, 8.5” size.

Price….£21.50.

Double ended callipers, 4”

Price….£12.95.

Also available, 7” size.

Price….£18.75.

To Woodturning

Tools Page

To Home

 Page

  ———————————————————————————————