|
ULLAPOOL WOODTURNING CENTRE. |
|
STB 150 Stebcentre. 1/2” No 1 MT drive. Price……£35.75. |
|
STB 100 Stebcentre. 7/8” No 1 MT drive. Price……£35.75. |
|
DRC/1 Hollow revolving centre No 1 MT. Price……£44.25. |
|
We are now stocking some additional equipment for woodturning, from drive centres, revolving centres, chucks, chuck jaws, faceplates, and some gauging & sizing tools. ————————————————————————— |
|
13mm Standard drill chuck & No 1 MT. Price……£19.00 (complete).
|
|
Vicmarc chuck, VM 100. Price….£176.00 These chucks usually require a thread reducing insert, supplied separately, see opposite,…………….. |
|
Vicmarc Chuck Insert. This will be required for most lathes, comes with an external thread that fit’s the chuck body, and an internal thread to fit a particular lathe, in this case a 3/4 x 16 tpi. Price….£28.60 Can be sourced to fit any lathe thread. |
|
A |
|
A |
|
Vicmarc Jaws. 25mm Pin Jaws — VM90/100 Price….£44.00 |
|
Vicmarc Jaws. Long Nose Jaws — VM90/100 Price….£44.00 |
|
Vicmarc Jaws/ Plate. 70mm Faceplate Ring — VM90/100 Price…..£15.50 |
|
Vicmarc Jaws. 220mm Bowl Jaws — VM90/100 Price….£85.80 285mm Bowl Jaws — VM90/100 Price….£91.50 These jaws are used to hold a bowl from the outer edge in order to remove any spigot or recess from the bottom of a bowl. |
|
These chucks can have a wide range of additional jaws and accessories fitted to them, some of which are shown below. |
|
Wood screw chuck. Removable screw, faceplate size, 65mm with 4 screw holes, thread size 3/4” x 16 TPI. Price….£12.95. |
|
Economy, 13mm drill chuck on No 1 MT. Price….£12.95. |
|
145mm diameter faceplate. Thread size 3/4” x 16TPI. (right hand thread). Price….£8.95.
|
|
4 Jaw Independent Lathe Chuck. Thread size 3/4” x 16TPI (right Hand thread). Price….£32.50. A useful accessory for turning off centred work. |
|
Below a selection of sizing and gauging tools. The woodturner will require a few sizing and gauging tools, such as dividers, callipers , both internal and external, double ended callipers and vernier callipers where a more accurate size can be achieved by setting to a specific size on the callipers. |
|
Dividers. Two sizes available, 8” & 12” Price for 12”….£6.50 8” sold as part of a set of 3, C1,C2 & C3. Price for the set….£19.95. |
|
C1 |
|
C2 |
|
C3 |
|
Callipers (external). Two sizes available, 8” & 12” Price for 12”….£6.99 8” sold as part of a set of 3, C1,C2 & C3. Price for the set….£19.95. |
|
Callipers (internal). Two sizes available, 8” & 12” Price for 12”….£6.99 8” sold as part of a set of 3, C1,C2 & C3. Price for the set….£19.95. |
|
Vernier Calliper. Economy grade, 165mm or 6.5”lockable. Price….£5.99. Deluxe model, 200mm or 8” lockable, Price….£19.99. |
|
Inside/outside callipers, 6” Price….£15.50. Also available, 8.5” size. Price….£21.50. |
|
Double ended callipers, 4” Price….£12.95. Also available, 7” size. Price….£18.75. |
|
To Woodturning Tools Page |
|
To Home Page |
|
——————————————————————————————— |
|
Home | About Us | Contact Us | Catalogue | Sales & Terms | Timber | Tuition & Demos | Restoration | Furniture | |