ULLAPOOL WOODTURNING CENTRE.

A & R MUTCH (WOODCRAFTS), THE WOODTURNING CENTRE, LOCHBROOM,

ULLAPOOL, ROSS-SHIRE, SCOTLAND, IV23 2RS.      Tel...01854 655334.

Rotating Unions

These devices have been designed as an aid to woodturning. It enables an item to be re-mounted on the lathe for finishing without risking further holding marks. The rotary adapter is fitted with two ball bearings and lets the lathe spindle turn freely while the hose , and connection remains stationary.

Rotating Union 10mm inlet– to suit vacuum hose.

M40.x2

 

Part No. V01216

Price…...£123.46

Rotating Union 32mm inlet– to suit vacuum cleaner.

M40 x 2

 

Part No. V01217

Price…...£104.53

These rotating unions have a dovetail pickup to suit a self centring four jaw chuck and an internal thread (M45 x 2) to suit  chuck insert (VM120/150). Two ball bearings prevent the hose from spinning.

Rotating Union M16 x 1.5– to suit back of lathe.

 

Part No. V01215

Price……£101.53

Rotating Union M16 x 1.5 screws into the outboard side of the lathe and connects to the vacuum hose. Two ball bearings prevent the hose from spinning. shown here in it’s working position on the lathe.

 

Vacuum Cups

Precision machine cast aluminium. Each cylinder includes two neoprene seals for internal or external pickups. The vacuum cups can be used with any of the three rotating unions. The rotating unions (10mm inlet or 32mm inlet) can mount directly to the vacuum cups. Alternatively an insert can be mounted to the vacuum cups and the rotating union M16 x 1.5 is attached to the outboard side of the lathe.

Note: cups thread is M40 x 2. insert if required would be for a VM90/100.

Vacuum cup screwed onto Rotating Union 10mm inlet, used with vacuum pumps.

Vacuum cup screwed onto Rotating Union 32mm inlet, used with vacuum cleaners.

Vacuum cup screwed onto Vicmarc VM90/100 insert, used with rotating union M16 x 1.5.

Vacuum Plate with rotating union 32mm inlet.

 

Part No. V01224

Price……£192.53

 

This unit consists of a 300mm diameter, foam covered plate and is fitted with a rotating union M40 x 2 32mm inlet.

Vacuum Plate only.

 

Part No. V01228

Price….£87.99

 

Vacuum plate can also accept a VM90/100 insert and be mounted directly to the lathe spindle. The rotating union M16 x 1.5 is used with this configuration. It can be used with the rotating union M40 x 2 10mm inlet (as shown).   The Vacuum plate can also be purchased separately.

Other Vacuum equipment and spares.

  ———————————————————————————————

To Lathes &

Equipment  Page.

100mm

150mm

200mm

Part No.  V01221

Part No.  V01222

Part No.  V01223

Price….£67.46

Price….£108.53

Price….£143.73

Part No.

Description

Price

V01220

Vacuum adaptor, old VL300/200 33 F—m16 x 1.5 M

£22.39

V01225

Vacuum Pump with tank

£1399.99

V01226

Vacuum pump without tank

£526.66

P00300

Replacement foam for Vacuum Plate

£10.99

P00301

Replacement O– Ring cord for Vacuum Cups (1.5 metre)

£20.00