ULLAPOOL WOODTURNING CENTRE.

A & R MUTCH (WOODCRAFTS), THE WOODTURNING CENTRE, LOCHBROOM,

ULLAPOOL, ROSS-SHIRE, SCOTLAND, IV23 2RS.      Tel...01854 655334.

  覧覧覧覧覧覧覧覧覧覧覧覧覧覧覧?

To Lathes &

Equipment  Page.

Drive Dog MT2, 19mm

Part No?..V00342

Price?..」26.39

Drive Dog MT2, 25mm Heavy Duty

Part No?..V00341

Price?..」46.93

Drive Dog Punch, 25mm

Part No?..V00950

Price?..」55.73

Live Centre MT2, Cone Light Duty

Part No?..V00261

Price?..」35.19

Live Centre MT2, Cone Heavy Duty

Part No?..V00269

Price?..」52.79

Live Centre MT2, Cup Heavy Duty

Part No?..V00270

Price?..」52.79

Live Centre MT2, Cup Light Duty

Part No?..V00271

Price?..」35.19

Pro Live Centre MT2,

Part No?..V00268

Price?..」79.19

Additional information

Pro Live Centre

Specially designed to discharge wood shavings when drilling through tailstock.

Drive Dog Punch

This accessory is designed to punch a drive dog impression on your stock piece of timber. This is done simply by holding the punch onto the timber and hammering the back. Using this tool will save you undue thrust on your lathe and the live centre bearings.

Drive Dog Threaded

Specially designed for salt and pepper shakers and candle holders.

Available in:

Thread                    Part No

M30 x 3.5                  V00343-1

M33 x 3.5                  V00343-2

1 1/4? X 8                  V00343-3

 

Price?..」42.53 each.

Drive Dog Multi

This consists of 3 individually removable drive dogs, 18mm, 26mm and 42mm, with an adaptor, which takes a VM120/150, insert to suit a variety of spindle threads. Some direct threads are also available.

The three drive dogs screw onto a body each one to suit your type of work.

Available in :

Thread                    Part No

M33 x 3.5                  V00344?2

M45 x 2                     V00344?5 (insert)

Price?..」170.13

Drive Dog Chuck Plate

Use with VM90/100 Chuck.

Price?..」32.66

Drive Dog Chuck Plate

Use with VM120/150 Chuck.

Price?..」36.66

The drive dog chuck plates are specially designed with a tapered plate to allow you to clamp it in a chuck with the Vicmarc standard jaws or equivalent.

Also available are some replacement parts for the drive dogs.

 

 

V00260

Pin, parallel shank to suit 19mm drive dog

Price?..」3.66

V00110-2

Body, for multi drive dog M33 X 3.5

Price?..」31.99

V00110-5

Body, for multi drive dog M45 X 2

Price?..」31.99

V00348

Drive dog, multi?19mm drive dog only

Price?..」46.66

V00349

Drive dog, multi?25mm drive dog only

Price?..」49.33

V00350

Drive dog, multi?40mm drive dog only

Price?..」50.60

V00887

Pin, parallel shank to suit 25mm drive dog

Price?..」3.86

V00892

Pin, tapered shank to suit 25mm drive dog

Price?..」3.86